
























Average customer rating: |
LSI Logic LSI7102XP-LC-KIT PCI-X Host Adapter Fibre Channel Controller
Manufacturer: LSI LOGIC ProductGroup: CE Binding: Electronics Product Features:
ASIN: B0000ET7U9 |
Product Description
The LSI7102XP-LC single-channel PCI-X Fiber Channel host adapter is a high performance, low-cost Fiber Channel solution. Seamlessly supporting point-to-point, arbitrated loop and switched fabric applications through automatic topology detection and by providing legacy support with automatic link speed detection, the LSI7102XP-LC is a highly flexible adapter card well matched to any storage area networking (SAN) application. The kit is designed as an "out of box" solution containing everything necessary to quickly install the card and attach to an enclosure, hub, router, or switch. All of this comes at an unbeatable price/performance ratio that reduces system cost and provides outstanding performance.
Average customer rating: |
Qlogic QLA2200-CK 1GB Fibre Channel Host Adapter
Manufacturer: QLOGIC ProductGroup: CE Binding: Electronics ASIN: B00007KJR7 |
Product Description
The SANblade 2200 Series is based on QLogic's award-winning Fiber Channel architecture and is designed for performance in the Storage Area Network (SAN) environment. The 2200 Series provides all the benefits of Fiber Channel technology - fabric connections for hundreds of devices, bandwidth to 200MB/s (in full duplex) - in a highly integrated cost-effective package. With PCI, CompactPCI (cPCI), and SBus models, the high-performance 2200 Series supports SAN-enabled features, like F-port fabric login, full duplex, FC-tape and IP protocol, creating a powerful SAN connectivity solution.The SANblade 2200 Series supports key features that are critical to real-world application performance. The high-speed, on-chip RISC processor and high-level software interface enable the 2200 Series to complete multiple I/O operations without host intervention, creating the lowest CPU utilization of any SAN adapter on the market. The result is the ability to add multiple host adapters with linear performance increases, expanding the reach of your SAN with minimal hardware investment. To further boost performance, QLogic's configuration utility provides tunable parameters for application-specific needs, and the industry-leading Reduced Interrupt Operation (RIO) allows you to significantly reduce CPU interrupts per I/O. The SANblade 2200 Series is designed for maximum functionality in the SAN. Cutting-edge SAN utilities like QLogic SANsurfer Tool Kit provide advanced capabilities for remote configuration and management, load-balancing and persistent binding. Enhanced software drivers include support for SAN-critical features including concurrent SCSI/IP and FC-tape. Plus, QLogic's unique software architecture simplifies integration, with an easy host software migration path between parallel SCSI and Fiber Channel application. The 2200 Series is far more than just hardware - it's a complete I/O solution.
Average customer rating: |
Atto ExpressPCI FC 3300 Fibre Channel Host Bus Adapter
Manufacturer: ATTO TECHNOLOGY ProductGroup: CE Binding: Electronics Product Features:
ASIN: B00006HQ0O |
Product Description
The ATTO ExpressPCI FC 3300 host adapter provides support for 2-Gigabit/sec. Fiber Channel and features automatic speed negotiation capability. This allows for complete compatibility with existing 1-Gigabit/sec. Fiber Channel Storage Area Networks (SANs), while allowing seamless upgrades to higher speed 2 Gigabit/sec. SANs. The ExpressPCI FC 3300 PCI offers a unique combination of hardware and software features that allows users to measure storage performance and easily configure storage.
Average customer rating: |
Apple AppleCare Service Parts for Xserve RAID - Storage controller (RAID) - ATA-100 - 100 MBps - RAID 0, 1, 3, 5, 10, 30, 50, 0+1 - Fibre Channel HD: 1 x 400 GB
ProductGroup: CE Binding: Electronics ASIN: B0009MZ3SI |
Product Description
To minimize downtime, Apple offers AppleCare Service Parts Kit for Xserve RAID which includes a RAID controller module, a cooling module, a power supply, a cable, and a 400GB Apple Drive Module. Xserve RAID is designed for quick and easy swapping of crucial parts; no special training or certification is required. AppleCare Service Parts Kits let you keep key modules handy to address the most common hardware failures.
Average customer rating: |
COMPAQ FIBRE CHANNEL HOST BUS CONTROLLER/
Manufacturer: Compaq ProductGroup: CE Product Features:
ASIN: B000MNHD1E |
Product Description
COMPAQ FIBRE CHANNEL HOST BUS CONTROLLER/
Average customer rating: |
ATTO FibreBridge 2400R/D - storage controller - Ultra320 SCSI - 4Gb Fibre Channel ( FCBR-2400-D00 )
Manufacturer: ATTO TECHNOLOGY ProductGroup: CE Binding: Electronics ASIN: B000BOPA1Y |
Product Description
The ATTO FibreBridge 2400R/D is a 4-Gigabit Fiber Channel-to-SCSI bridge configured with dual independent 4-Gigabit Fiber Channel Ports and dual-stacked Ultra320 SCSI busses with a VHDCI interface. The FibreBridge 2400R/D is designed to integrate industry leading performance and Storage Area Network (SAN) capabilities into future generation storage solutions.With a high performance architecture utilizing a 4-Gigabit Fiber Channel interface, the FibreBridge 2400R/D is the industry's first choice for Tape Automation OEMs who need to integrate today's high-performance LTO-3 and SDLT600 tape drives.The ATTO FibreBridge 2400R/D is a desktop unit designed to take up a minimal amount of space in a crowded IT environment.
Average customer rating: |
LSI Logic LSI7202XP-LC-KIT Dual-Channel PCI-X Fibre Channel Host Bus Adapter
Manufacturer: LSI LOGIC ProductGroup: CE Binding: Electronics Accessories:
ASIN: B0000ET93V |
Product Description
The LSI7202XP-LC-KIT dual-channel PCI-X Fibre Channel HBA provides industry leading 2 Gb/s performance for applications where high bandwidth is essential. Seamlessly supporting point-to-point, arbitrated loop and switched fabric applications through automatic topology detection and by providing legacy support with automatic link speed detection, the LSI7202XP-LC is a highly flexible adapter card well matched to any SAN environment. The kit is designed as an "out of box" solution containing everything necessary to quickly install the card and attach to an enclosure, hub, router, or switch. All of this comes at an unbeatable price/performance ratio that reduces costs and provides outstanding performance.
Average customer rating: |
Mylex 08P2707 PCI-64 Fiber Channel RAID Controller for SAN
Manufacturer: Mylex Corp. ProductGroup: CE Binding: Electronics ASIN: B00006HONM |
Product Description
The eXtremeRAID 3000 fibre channel RAID Controller, best suited for SAN applications, offers full-featured RAID with uncompromising fault tolerance, data availability, longer cable lengths, higher data transfer rates and the ability to attach up to 252 drives for capacities up to 18.1 terabytes. The eXtremeRAID 3000 RAID controller delivers unparalleled performance and is capable of sustaining disk transfer rates of over 90MB/s and sustained cache transfer rates of over 180MB/s. It's dual fiber loops for drive-connect provide redundant connections to give extra fault tolerance for high-data availability applications. The split memory architecture provides a cache (ECC for data, parity for execution code) size of 32MB and 64MB for optimum throughput. It uses the fastest RISC processor on a PCI based RAID solution. The eXtremeRAID 3000 offers two fiber loops capable of data transfers of 100MB/s. It features a 64-bit PCI interface at 33MHz. Adding to the performance story is Mylex's proven, award-winning RAID firmware. The eXtremeRAID 3000 uses driver technology that has won Mylex more TPC-C benchmarks than any other RAID controller worldwide. With this technology, the eXtremeRAID 3000 provides the highest performance and most flexible RAID solution available.
Average customer rating: |
Mylex 08P2708 Single Channel Ultra 64MB Fibre Channel Controller
Manufacturer: Mylex Corp. ProductGroup: CE Binding: Electronics ASIN: B00006HOPR |
Product Description
The eXtremeRAID 3000 fibre channel RAID Controller, best suited for SAN applications, offers full-featured RAID with uncompromising fault tolerance, data availability, longer cable lengths, higher data transfer rates and the ability to attach up to 252 drives for capacities up to 18.1 terabytes. The eXtremeRAID 3000 RAID controller delivers unparalleled performance and is capable of sustaining disk transfer rates of over 90MB/s and sustained cache transfer rates of over 180MB/s. It's dual fiber loops for drive-connect provide redundant connections to give extra fault tolerance for high-data availability applications. The split memory architecture provides a cache (ECC for data, parity for execution code) size of 32MB and 64MB for optimum throughput. It uses the fastest RISC processor on a PCI based RAID solution. The eXtremeRAID 3000 offers two fiber loops capable of data transfers of 100MB/s. It features a 64-bit PCI interface at 33MHz. Adding to the performance story is Mylex's proven, award-winning RAID firmware. The eXtremeRAID 3000 uses driver technology that has won Mylex more TPC-C benchmarks than any other RAID controller worldwide. With this technology, the eXtremeRAID 3000 provides the highest performance and most flexible RAID solution available.
Average customer rating: |
HP D6977AV HBA 64 Bit Fiber Channel
Manufacturer: Hewlett Packard ProductGroup: CE Binding: Electronics ASIN: B00006HPDT |
Product Description
The Hewlett-Packard Fiber Channel Adapter is a reliable, high performance serial I/O storage interface for servers. The serial nature of Fiber Channel brings the flexibility and ease of use of LAN connectivity to storage attachment, introducing the idea of Storage Area Networks (SAN). Fiber Channel simplifies the physical configuration issues related to the I/O channel. Peripherals may be positioned at considerable distances from the server (depending on cabling media) for convenience or for data security. More reliable in data transfer than conventional LAN, Fiber Channel offers Gigabit performance and greater device connectivity than parallel SCSI. The HP Fiber Channel Adapter provides the I/O channel scalability required for continuous growth in storage capacity and availability needs.Electronics: